Firmware Upgrade HDS2-6141/HDS2-6141PRO & Secret code

If you have an HDS2-6141 / HDS2-6141PRO set-top box and your box has been dead due to any problem then here we are telling you that how to upgrade your box without sending it to the service center. You can recover your Solid set-top box at home without any headaches.

You can repair your dead firmware IC just using the USB uboot function.

How does it work? -

You can just follow a few steps to recover your HDS2-6141 and HDS2-6141PRO box. 

  • First, download firmware according to your box model number, below this post.
  • Now you can rename your firmware as rom.bin file
  • Now keep this file in formatted USB Pendrive
  • and plug-in USB to your box
  • Now switch on your box from the main power.
  • It will automatically  start upgrade firmware
  • If not, then you can press the "OK" button and switch on your box from the main power.
Plug-in the USB Device with your box and press the ok button and same time switch on your box from the mains.
Plugin the USB Device with your box and press the ok button and same time switch on your box from the mains.

Now It will show the same above screen which will remove your current firmware from your set-top box IC, wait till it completes 100%.
Now It will show the same above screen which will remove your current firmware from your set-top box IC, wait till it completes 100%.

    Now It will show the same above screen which will rewrite new firmware in your set-top box IC, wait till it completes 100%.
    Now It will show the same above screen which will rewrite new firmware in your set-top box IC, wait till it completes 100%.


      After completing the upgrade main code loader, it will show a message that "Upgrade Success, Please reset the system. Now you can remove Pendrive and restart your box from mains.
      After completing the upgrade main code loader, it will show a message that "Upgrade Success, Please reset the system. Now you can remove Pendrive and restart your box from mains.





If you are lucky then your box will be recovered, it will show "Load" on the LED panel, wait for 10 seconds to load firmware, and restart the box.
If you are lucky then your box will be recovered, it will show "Load" on the LED panel, wait for 10 seconds to load firmware, and restart the box.



Download Firmware Now








Post a Comment

0 Comments